Mirka Unipad Grip/Velcro 150mm Medium Backing Pad
Unipad, 5/16" and M8. Suitable for narrow shroud machines.
Delivered with one 150 mm (6") pad saver. To ensure correct installation, always use the supplied spacing washers, making sure that a minimum gap exists between the sander’s shroud and the top part of the backing pad, to prevent friction between the two parts. Tighten the screw hard. The backing pad should never turn idle. From time to time, check that the screw is well tight.
Note that these backing pads are not recommended to be used with Mirka® sanders.
Holes - 61
Attachment type - Grip/Velcro
Diameter 150mm
Screw - 5/16" + M8
Brand | Mirka |
---|---|
Size | 150mm |
-
SERVICE
At Abacus our first priority is always SERVICE
-
DELIVERY
Local deliveries fulfilled by our fleet of vehicles, and by carrier
-
EXPERIENCE
Established as a successful family business since 1993
-
DIVERSITY
High quality coatings and equipment